My Chevy Bolt EV Sat Unplugged in the Cold: Here’s What I Learned – Torque News

Our Chevrolet Volt needed a chance to plug in for a while over Christmas week, so that meant that my Chevy Bolt EV needed to spend some time unplugged in during freezing overnight conditions. Ive been attempting to track the Bolt EVs battery thermal management behavior, so this gave me a great opportunity to spy on the inner workings of the Bolt EV using Torque Pro (an app that reads the cars sensor data through the OBD2 port.

Before I start, I want to mention that while these winter conditions arent particularly harsh, they are cold enough to limit electric vehicle battery performance and trigger many of the Chevy Bolt EVs thermal management systems. In this story, I will describe what I learned about the 2017 Chevy Bolt EVs battery thermal management systems after leaving it unplugged in freezing overnight conditions for two days.

Chevy Bolt EV Vampire DrainWhen I dont have a long trip lined up, I prefer to leave my 2017 Chevy Bolt EV with Hilltop Reserve mode on. This mode was originally designed for Bolt EV owners who started their drives as higher elevations, and it provides full regenerative braking and additional battery capacity to recapture energy (which is otherwise limited when the battery is full). Hilltop Reserve limits the car to charging the battery to 88.2% (according to Torque Pro readings), so when I unplugged my Bolt EV and sent it to pasture, thats how much capacity it had.

Just for reference, Hilltop Reserve was replaced in later model Chevy Bolt EVs. In 2019, GM introduced a new feature to the Bolt EV that enables the owner to set a Charge Limit in 5% increments.

For those who are unfamiliar, vampire drain is a term used to describe the power draw by an electric vehicles onboard electronics that slowly deplete battery capacity overtime. Over the years, Ive been able to confirm that whatever the Chevy Bolt EVs vampire drain was, it was very low. When I first got the car, I hit a rock and blew out the tire, so my Bolt EV was left at about 4,000 overnight in January while I picked up a replacement tire. The vampire drain was low enough then, that by the time I returned, the estimated range hadnt changed.

Thanks to Torque Pro, I can now quantify just how much the battery capacity drained after two days with freezing overnight temperatures. When I turned on the car and checked Torque Pro, it displayed 87.8% battery capacity. So in two days, my Bolt EV had consumed less than .5% of its total capacity.

Chevy Bolt EV Internal Battery TemperatureIn addition to checking my Bolt EVs battery capacity when I started it up, I also checked the core battery temperature. Because the Bolt EV had been left out overnight without being plugged in, Torque Pro displayed that its core battery temperature had dropped to 35.6 degrees Fahrenheit. This is not unusual because I had seen similar internal battery temperatures on previous occasions when I had left the car unplugged. To contrast, with similar overnight temperatures but with the Bolt EV plugged in, it had maintained an internal battery temperature of 59 F.

I did notice something peculiar this time around when I had left the Bolt EV unplugged, however, and that was that it appeared to fine with the battery at 35.6 F. Previously, when I had left the Bolt EV unplugged (letting the battery temperature drop to the low 30s), the moment I turned the Bolt EV on, it started the battery heater. The only difference I can identify is that in the previous case, the car was still registering an outside temperature in the 30s.

This time, though, the outside air temperature sensor was exposed to the sun, and it was registering an ambient air temperature of 76.1 F. My guess is that something in the Bolt EVs programming is telling it to not bother running the battery heater if the outside temperatures are high enough that it will eventually warm on its own.

However, the moment I shifted the Bolt EV into drive, the battery heater immediately engaged.

Chevy Bolt EV Battery HeatingThe reason I was plugging my Chevy Bolt EV was that I was getting ready to make a 150-mile trip to do some shopping, so I wanted to start warming the battery and adding a little extra energy. As I drove over to our plug, the battery heater started drawing 2,333 watts (about 2.3 kW). By the time I made it to our charger, my Bolt EV had consumed 0.1 kWh with 64% of that energy being used for battery conditioning.

I turned off the Hilltop Reserve mode, plugged in the car, and shut it off. I knew I had about 30 minutes before we were going to leave, so I wanted to see how much the Bolt EVs battery would warm while it was shut off and charging. To my surprise, the Chevy Bolt EV didnt appear to run the battery heater aggressively when it was off and charging. The battery temperature had leveled off at 41 F when it was charging.

When I turned the Bolt EV back on, however, the battery heater immediately started, and it was now drawing 2,407 watts (2.4 kW). It continued to warm the battery until I unplugged, but I stopped monitoring it with Torque Pro at that point. What I could tell is that it continued to warm the battery as I was actively driving, which resulted in significantly lower efficiency than normal during the first 20 miles or so of driving.

By the end of the trip, the battery temperature had warmed to 62.6 F compared to an outside temperature of 47 F, and all of the energy consumed for battery conditioning no longer even accounted for 1% of the 43.5 kWh expended to complete the 160 mile trip.

ConclusionWhile this is still just a snapshot of the Chevrolet Bolt EVs battery warming parameters, it can still inform Bolt EV owners on how they should operate their vehicles during cold weather. The Bolt EV will not suffer significant vampire drain; however, it will consume a significant amount of energy warming the battery after it is turned on. For that reason, Chevy Bolt EVs should be left plugged into the charger during freezing conditions.

In addition, the Bolt EV will not warm the battery as aggressively when it is turned off, even if it is plugged in and charging. To properly warm the battery during harsh winter conditions, it might be necessary to actually turn the car on while it is still plugged in. This might also be more effective than preconditioning the car because the Chevy Bolt EV will only stay on for 20 minutes during precondition, but it will stay on for approximately 1 hour if turned on from inside the vehicle using the FOB.

Still, the Chevy Bolt EVs onboard battery charger appears to be limited to 2.4 kW, so it still might not be capable of maintaining the batterys ideal operating temperatures in very harsh winter climates.

About The AuthorEric Way focuses on reporting expert opinion on GM brand electric vehicles at Torque News. Eric is also an instructional designer and technical writer with more than 15 years of writing experience. He also hosts the News Coulomb video blog, which focuses on electric vehicles, charging infrastructure, and renewable energy. Eric is an active member of the EV Advocates of Ventura County, a volunteer organization focused on increasing the widespread adoption of electric vehicles. You can follow Eric on News Coulomb Youtube, on Facebook at @NewsCoulomb as well as on Twitter at @eway1978.

Excerpt from:
My Chevy Bolt EV Sat Unplugged in the Cold: Here's What I Learned - Torque News

Related Post

Reviewed and Recommended by Erik Baquero
This entry was posted in Vampire. Bookmark the permalink.

Comments are closed.